PS5 DualSense Trigger Flex Cable Right & Left – L1/L2 R1/R2 (BDM-010 / 020 / 030 / 040)

Replace defective, damaged, or worn trigger flex cables in your PS5 DualSense controller. The cables connect the L1/L2 and R1/R2 trigger sections to the controller's motherboard.

The flex cables are model-dependent and vary between different DualSense revisions. Check the controller's BDM model before ordering and select the correct version from the drop-down menu.

Compatibility

• V1.0 – BDM-010
• V2.0 – BDM-020
• V3.0 – BDM-030 / BDM-040

Product Specifications (V3.0 / FFC Cable)

• Type: FFC (Flexible Flat Cable)
• Number of conductors: 6-pin
• Pitch: 0.5 mm
• Length: 35 mm
• Width: 4 mm
• Contact orientation: Type A – contacts on the same side
• AWM Style: 20624
• Rated voltage: 60 V
• Temperature rating: 80 °C
• Flammability rating: VW-1

Note: The above specifications apply to V3.0. V1.0 and V2.0 have different designs and specifications.

Installation

• No soldering required – ZIF/FFC connector-based installation
• Requires opening the DualSense controller
• Recommended tools: Phillips PH00 screwdriver, plastic spatula/opening tool, tweezers

Package Contents

• 2 × trigger flex cables (left + right)

Note: Check the BDM number on the label inside the controller before purchase to ensure the correct version.